The stand will be constructed as shown on your stand drawing, which can be downloaded via the link at the top of this site.
Mark the technical installations, you wish to purchase, at the stand drawing. This applies to for instance power supply and sockets. Please state the name, address and phone number of the architect or decorator, who are responsible for the construction of the stand.
Additional technical orders must be ordered through the expo shop, which you can find at the top à next to My orders.
In connection with the construction of your stand, we refer to MCH's rules of conduct
CONSTRUCTIONS HOURS
CONSTRUCTION
| Thursday | 26 September | 7:00 a.m. - 4:00 p.m. |
| Friday | 27 September | 7:00 a.m. - 7:00 p.m. |
| Saturday | 28 September | 7:00 a.m. - 4:00 p.m. |
| Monday* | 30 September | 7:00 a.m. - 6:30 p.m. – please note the end time |
DURING THE EXPO
| Tuesday | 1 October | 7:00 a.m. - 8:30 a.m. |
| Wednesday | 2 October | 7:00 a.m. - 8:30 a.m. |
| Thursday | 3 October | 7:00 a.m. - 8:30 a.m. |
* Valid admission card must be presented
* You have 1½ hour to unload your goods in front of the gates
PLEASE NOTE:
For the sake of free passage to the halls in case of fire and evacuation, we need to limit entry and exit to the halls to 1½ hour.
Readings that are estimated to last longer must be completed on one of the other construction days.
If you wish to gain access to the hall and to your stand outside the official opening hours as stated above, please contact Rune Noesgaard on e-mail rno@mch.dk or by tel. +45 99 26 98 65.
Please note that our service functions in both cases will not necessarily be fully staffed.
PORT/GATE OVERVIEW
Find out which gate to use during construction and dismantling of your stand, see the overview below:
Hall F, L - M
Messevejen
Entrance: via port/gate 20 or 21 – port/gate 25 - then drive to your hall
Exit via Port/gate 25 – Port/gate 20 or 21 - Messevejen
Hall J and K
Vardevej
Entrance: P1 – port/gate 4- then drive to your hall
Exit: via Port/gate 4 via P1
FOREIGN CONSTRUCTORS
If you are using foreign companies to the construction of your stand, please remember to remind the foreign companies to register in "RUT – The Register of Foreign Service Providers".
The Register of Foreign Service Providers (RUT) is the Danish government's official register to report a foreign service. Foreign service providers (employees and self-employed) working in Denmark must register in RUT.
In proportion to the exhibition, RUT must be completed, if you use foreign labour to construct your stand.
MCH does hereby notify:
MCH has no obligations in this aspect. The link below goes to the website of The Danish Working Environment Authority (WEA) about RUT
